
Replacing a broken garage door spring can save you money and ensure your door functions properly.
Tools You Will Need
- Safety goggles
- Gloves
- Wrenches
- Screwdriver
- Measuring tape
- Replacement spring
Types of Garage Door Springs
- Extension Springs
- Torsion Springs
Step-by-Step Guide to Replace Broken Garage Door Spring
Step 1: Safety First
Before starting, make sure to disconnect the garage door opener and use safety gear.
Step 2: Determine the Type of Spring
Identify if you have torsion or extension springs, as replacement methods differ.
Step 3: Gather Tools
Gather all the required tools as listed above. Being organized will help the process.
Step 4: Remove the Damaged Spring
For **torsion springs**:
- Loosen the screws on the end bracket.
- Carefully unwind the spring using winding bars.
For **extension springs**:
- Disconnect the safety cable.
- Unhook the springs from the bracket.
Step 5: Install the New Spring
For **torsion springs**:
- Insert the new spring into the bracket.
- Carefully wind the spring using winding bars.
For **extension springs**:
- Hook the new spring back onto the bracket.
- Reconnect the safety cable.
Step 6: Test the Garage Door
After installation, check the balance of the door and ensure it opens and closes smoothly.
Common Mistakes to Avoid
- Not wearing appropriate safety gear.
- Over-tightening the springs.
- Forgetting to disconnect the opener.
Maintenance Tips for Garage Door Springs
- Regularly lubricate the springs.
- Inspect for wear and tear every 6 months.
FAQs
How long does a garage door spring last?
Typically, garage door springs can last 7 to 9 years or around 10,000 cycles.
Can I replace both springs at once?
Yes, replacing both springs is recommended for balance and longevity.
Is it safe to do this myself?
As long as you follow safety procedures and use the right tools, it can be safe.
Statistics Table
Spring Type | Average Cost | Lifetime (Cycles) |
---|---|---|
Torsion Spring | $200-$300 | 10,000 |
Extension Spring | $150-$250 | 5,000 |
Mind Map of Garage Door Spring Replacement Process
– Identify Spring Type
– Gather Tools
– Remove Broken Spring
– Install New Spring
– Test Garage Door Operation
– Maintain Regularly


